ATX® Fold Back Rack – Wall Mounted

1. Once folded, the rack sticks out only 13cm from the wall!
2. Remarkably simple folding mechanism – just pull out two pins.
3. The uprights come with embedded rollers which protect your floor and makes the whole folding process effortless. It also allows the uprights to have additional support, which means that the mounting bolts will receive significantly less stress.
4. Certified for commercial use – use it in a commercial setting, it can handle the abuse.
5. J-Hooks, Single Chin Up Bar are included with the Rack!

The ATX® Folding Half Rack perfectly represents the excellence of German craftsmanship. The uprights are manufactured out of 70 mm x 70 mm tube steel with a 3mm wall thickness. To add to the rigidity, it is braced with a cocktail of 5/6mm Brackets and a mix of high-tensile strength M12/M20 Hardware.

This combination of materials helped the ATX® Fold-Away Rack to achieve the highest commercial certification standard – EN 20957 I.II.IV – S.

This rack is both a grower and a shower. When it is tucked away, it measures a measly 13cm from the wall. But when you’re ready to get hot and sweaty, you can unleash the beast.

Once erect, your rig is a massive 61cm from the wall. This will allow you to go both hard and deep, in your favourite positions, with full range of motion. It would be only natural to think that you would not be fully satisfied by something “fold away”.  Nothing could be further than the truth. 

You can go just as hard as you would on any full-sized equipment, and it will have you walking funny for days!

The ATX® Folding Half Rack can be quickly stowed by taking out the single chin-up bar, which is held by two solid steel 20mm thick pins. There are no complicated mechanisms, just drop in pins.

To put the icing on the cake, the guide rails of this folding half-rack comes with two extremely resilient polyamide rollers, which protect your floor and make it effortless to fold away.

The rollers will also bear some of the weight load when you are training. This means that the mounting bolts will not be stressed by all the weight.

The racks overall load rating is a modest 500kg (safe working load) which should not be confused with a breaking point of the machine.

The included J-Hooks are manufactured out of solid 10mm thick sheet steel and come with UMHW Nylon Protectors – they can comfortably withstand loads of up to 450kg.

The Straight Chin Up Bar is manufactured out of 32 mm x 3 mm steel tube and is rated for 200kg.

The new, redesigned ATX® Range features a variety of compatible attachments. Such as Jammer Arms, Monolift, Dip Handles, Landmine, T-Bar Row, Spotter Arm and Wrist Roller attachments.

With endless ingenuity of the German Engineers, the accessory list is constantly growing.

The mounting rail can be used to you give greater flexibility for fixing the rack to your wall. If the optimal position for your rack is where there is a gap in the brick work, the mounting rail can solve this issue for you. 

The bracket itself is manufactured out of a 3mm thick piece of steel which is bent and laser cut.